Peak 25 Short NX
Shortened self-inflating mat with one row of horizontal chambers up to 37mm high
Main advantages
Used materials
Flat two-layer valve with check valve for easier inflation/deflation and pressure regulation in the mattress.
When the top layer of the valve is opened, the mattress can be easily inflated thanks to the non-return flap without losing pressure. By pushing the flap, the pressure in the mattress can be gently regulated. When the second layer is opened, the valve is fully open and the mattress can be easily deflated.
The simple design of the wide horizontal chambers combines maximum foam lightness with high thermal resistance achieved by preventing air circulation in the mattress. When inflated, the wide chambers form into cylinders that significantly increase the comfort of the mattress.
To prevent air leakage through the top fabric of the mattress, an impermeable membrane is laminated to the polyester fabric. Laminating a continuous membrane instead of applying a coating eliminates the possibility of applying an uneven layer of coating, which could lead to the weakening of some parts and subsequent air leakage.
The brushed polyester gives a nice soft feel and prevents bunching.
Detailed Description
Peak Short NX
Spartan version of the Peak 25 mat, with great packability, in exchange for a tiny bit of discomfort. The shape of the mat is just enough to support the torso including the buttocks, the feet will remain on the bare ground, so we recommend using at least a waterproof mat.
The construction with one layer of relatively large horizontal cavities saves the weight of the mat even more, while maintaining relatively high thermal comfort.
The cavities also form a pleasant wavy structure of the mat after being inflated.
Sanding the top layer of the material increases its friction, so your sleeping bag will not slip off the mat.
Technical specification
| Dimensions | 120 x 52 x 2,5 cm |
| Shape | Shorted |
| Weight | 490 g |
| Foam construction | SHC - Single horizontal chambers |
| Foam | Polyurethane |
| Upper material | Brushed polyester - non-slipping, TPU Lamination |
| Bottom material | Polyester, TPU lamination |
| Repair kit | Yes |
| Carry bag | Yes |
| Type | Self-inflating |
| Height | to 3 cm |
| Package Size | ⌀12 x 26 cm |
DLF - Dual layer flat valve
Flat two-layer valve with check valve for easier inflation/deflation and pressure regulation in the mattress.
After opening the top layer of the valve, the mat can be easily inflated thanks to the non-return flap without loss of pressure. By pushing the flap, the pressure in the mattress can be gently regulated. After opening the second layer, the valve is fully open and the mat can be easily deflated.
SCC - Single horizontal chambers foam construction
The simple construction of wide horizontal chambers combines the maximum possible foam relief with high thermal resistance achieved by preventing air circulation in the mattress. After being inflated, the wide chambers are formed into cylinders, which significantly increase the comfort of the mattress.