Horizon
A spacious tent with a large variety of entrances and a large vestibule retains the advantage of small tents - easy and quick construction.
Main advantages
Used materials
The fiberglass rods are made with a new technology that achieves lower segment weight with increased resistance to breakage.
Lightweight and solid polyester flysheet fabric has high resistance to UV, does not age and retains its properties during prolonged exposure to sunlight and heat
PU coating
It is a thin waterproof polyurethane layer applied several times on the inside of the tropic.Depending on the number of layers of coating, the tropic is resistant to water pressure up to 4000mm (Extreme and Hiking series), 3000mm (Trekking and Family series) and 2500mm (Outdoor series). The coating retains its elasticity even at very low temperatures well below freezing.
Detailed Description
Horizon
A spacious tent with a wide variety of entrances and a large vestibule retains the advantage of small tents – easy and quick construction.
Rain fly is made of Polyester with a polyurethane coating, which gives it a water column with a height of 4,000 mm. Seams are taped with heating tape to prevent leaks.
The floor is made of layered Polyethylene with Rip-Stop treatment.
The tent poles consist of laminate segments with a diameter of 8.5 mm.
Technical specification
| features: | |
| Weight | 4.9 kg |
| Package Size | ⌀24 x 47 cm |
| Number of people | 2 - 3 |
| Amount of enterances | 2 |
| Construction type | Cupola |
| Amount of vents | 2 |
| Number of poles / crossing points | 3 / 1 |
| Buildable without a bedroom | No |
| Height of tent (bedroom) | 135 (130) cm |
| Siliconised | No |
| Taped seams | Yes |
| Number of pins | 19 |
| Category | Trekking |
| Material | |
| Material of poles | Fiberglass |
| Pole diameter | 8.5 mm |
| Flysheet material | Polyester, PU coating 4 000mm H2O |
| Groundsheet material | Layered Polyethylene Rip-Stop |
Description
The tent is double-layered and consists of an inner tent and an outer layer – the rain fly. The inner tent has a rectangular floor plan with an entrance on its longer side. The outer tent has a large vestibule that can be entered through two different entrances and is suitable for e.g. storing luggage, cooking, etc.
Ventilation
It is located at the top of the dome of the rain fly. The canopies of the ventilation windows are shaped so that they are not folded by the wind, if necessary they can be closed with Velcro fasteners. This prevents leakage even during rain with strong wind.
Building a tent
Hang the inner tent with hooks on the structure made of crossed tent poles, the ends of which we insert into the metal hollow rivets in the corners of the floor. We pull the rain fly over the structure and insert the tent pole tensioning the vestibule into the perforated sleeve, insert it into the metal hollow rivets and tension it into the arch. Then we attach the Velcro fasteners on the underside of the rain fly to the rods. Fasten the plastic three-pronged clips on the lower edge of the rain fly and pull it tight. Anchor the tent with pegs and cords.
Similar products
-
Innovated tent model with two entrances and vestibules and with two cross bars. The v...€ 211.79 -
A spacious three-person tent with a wide choice of entrances and a large vestibule th...€ 309.60 -
A spacious three-person tent with duralumin poles, a wide choice of entrances and a l...€ 366.40 -
Tent for four people with two entrances and vestibules and with two transverse top po...€ 253.60 -
Tent with duralumin construction for up to four people with two entrances and vestibu...€ 296.19 -
Self-supporting tent for three people with two side entrances and a spacious vestibul...€ 324.20