Campus 4
A spacious four-person tent with a wide choice of entrances and a large vestibule that retains the advantage of small tents - quick and easy to erect
Main advantages
Used materials
The fiberglass rods are made with a new technology that achieves lower segment weight with increased resistance to breakage.
Lightweight and solid polyester flysheet fabric has high resistance to UV, does not age and retains its properties during prolonged exposure to sunlight and heat
PU coating
It is a thin waterproof polyurethane layer applied several times on the inside of the tropic.Depending on the number of layers of coating, the tropic is resistant to water pressure up to 4000mm (Extreme and Hiking series), 3000mm (Trekking and Family series) and 2500mm (Outdoor series). The coating retains its elasticity even at very low temperatures well below freezing.
Detailed Description
Campus 4
The flysheet is made of Polyester with a polyurethane coating, giving a water column of 4,000 mm. Seams are fully taped to protect against leakage.
The groundsheet is made of nylon with a polyurethane coating giving it a water column of 10,000 mm.
The poles are made up of laminate segments with a diameter of 9 mm (main poles) and 7 mm (brace above the entrance to the inner tent).
Technical specification
| features: | |
| Weight | 7.5 kg |
| Weight without inner tent | 5.7 kg |
| Package Size | ⌀21 x 60 cm |
| Number of people | 3 - 4 |
| Amount of enterances | 2 |
| Construction type | Cupola |
| Amount of vents | 5 |
| Number of poles / crossing points | 4 / 1 |
| Buildable without a bedroom | Yes |
| Height of tent (bedroom) | 150 (140) cm |
| Siliconised | No |
| Taped seams | Yes |
| Number of pins | 24 |
| Category | Trekking |
| Material | |
| Material of poles | Fiberglass |
| Pole diameter | 9 mm |
| Flysheet material | Polyester, PU coating 4 000mm H2O |
| Groundsheet material | Nylon, PU coating 10 000mm H2O |
Description
The tent is double-skinned consisting of an inner tent and flysheet. The inner tent has a rectangular floor plan with one entrance on its longer side. The flysheet forms a large vestibule that can be entered through two different entrances.
Tent concept
This is based on the principle of a pole structure threaded through sleeves made of perforated material on outside of the flysheet. The flysheet and inner tent (which is suspended under the flysheet) are erected at the same time after threading the poles through the sleeves. The advantage of this method is that the inner tent can be detached from the flysheet and the flysheet can then be erected separately to create a single-skin tent without a groundsheet.
Venting
It is located at the top of the tropical dome. The ventilation windows are shaped so that they are not tilted by the wind. This prevents leakage even in rain with strong winds.
Tent construction
Push the structure's rods through the perforated sleeves on the outside of the tent and insert the ends of the rods into the brass eyelets on the loops at the bottom edge of the tent. Then clip the buckles on the straps at the ground inside the tent and this will set up the tropic. Fasten the inner tent into the loops on the inside of the tent. After the tent is erected, anchor it with pegs and cords and fasten it with plastic clips.
Similar products
-
A spacious three-person tent with a wide choice of entrances and a large vestibule th...€ 310.40 -
A spacious three-person tent with duralumin poles, a wide choice of entrances and a l...€ 367.34 -
A spacious four-person tent with duralumin poles, a wide choice of entrances and a la...€ 408.46 -
A spacious five-person tent with a wide choice of entrances and a large vestibule tha...€ 449.98 -
A spacious five-person tent with duralumin poles, a wide choice of entrances and a la...€ 547.65